EDIC PTAC Cleaning Cradle™ For Wall Mount Commercial Air Conditioners

The EDIC patented PTAC (Packaged Terminal Air Conditioner) cleaning cradle helps make the PTAC cleaning process simpler and quicker. This durable stainless steel fixture allows a single operator to remove and clean PTAC units right in the room where it was removed. The cradle can be adjusted from 2.5″ to 16″ off the floor to allow the user to safely and easily remove the interior of the PTAC system from the exterior shell in the wall.

The unit tilts forward or backward and left or right to direct wastewater to the vacuum for constant waste removal during the cleaning process. It also has casters on both sides of the jacks for easy transport from room to room. The Cleaning Cradle can be used with any carpet extractor or multi-purpose cleaning equipment that pumps water and has a wet and dry vacuum system. While in the cradle, you can easily access and clean the rear condenser, the pan, the vent screen, the evaporator coil and more. This cleaning process is made even easier when using a wand like the 25′ pre-spray extraction wand.

Don’t have an extractor for this job? Add the optional EDIC Galaxy Pro PTAC Extractor Kit to get yourself a powerful extractor along with all the tools to aid you in your PTAC cleaning. The kit comes with the EDIC Galaxy™ carpet extractor which is a 17 gallon extractor with 220 psi pump and 3-stage vacuum. The kit also comes with a sink fill adaptor to easily fill your extractor, 25 ft. vacuum hose to connect to the cradle, a 25 foot solution hose and a 2 foot spray wand for reaching all the areas on the PTAC unit that needs cleaning.

Features

• Cleans any PTAC found in hotels, motels, condominiums, nursing homes, apartments, hospitals, and more!
• Adjusts vertically from 2.5-16 inches off the floor for any PTAC in any room.
• Tilts forward or backward and left or right to direct wastewater to the vacuum for constant waste removal during the cleaning process.
• Durable Stainless Steel construction with minimum wear on parts.
• Works with any portable extractor machine that pumps water and has a wet and dry vacuum system.
• Enables your PTAC to work more efficiently to extend the life of the unit and to reduce electricity consumption while producing better air quality in the room.
• The optional EDIC Galaxy Pro PTAC Extractor Kit gives you everything you need to clean your PTAC in one simple package.